Wednesday, October 19, 2011

A History of Safety

!9# A History of Safety

[if ]
[endif]

Throughout history, the safety and health movement has been impacted by legislation. In the following safety and health chronology, noteworthy events, individuals, and legislative action are set forth to illustrate the theme that the safety professional/practitioner is and has been a significant part of those preventive experiences making up the story of life.

The Ancient Chinese (c 2,500 BC) spread the risk of loss by placing 1/6 of their harvest on each of six boats traveling to the market.

Hammurabi (c 2,000 BC), ruler of Babylon, was responsible for the Code of Hammurabi, part of which bears resemblance to today's workers' compensation laws.

Ancient Egyptians (as early as 1600 BC) recognized the hazards of breathing the fumes produced by melting silver and gold.

Hippocrates (c 460-c 377 BC), the father of contemporary medicine, established a link between the respiratory problems of Greek stonecutters and the rock dust surrounding them.

In ancient Rome, the few slaves who survived the dangerous task of ship launching were given their freedom.

In 1601, the first English statute on "assurance" (an earlier term for insurance) was enacted. This statute covered marine risks.

In 1667, the Great Fire of London (September 2-7, 4666), caused the first English fire insurance laws to be enacted.

In 1700, Bernardino Ramazzini, an Italian physician, published the first thesis attempting to prove the connections between occupation and disease.

In 1730, Benjamin Franklin organized the first fire-fighting company in the United States as well as detecting lead poisoning symptoms with Dr. Evans.

In 1775, English doctors discovered that chimney sweeps, who were exposed to coal tar residues in their daily work, showed a higher incidence of cancer than did the general population.

In 1792, the first charter to write marine and fire insurance was granted in the United States.

In 1812, the Embargo of the War of 1812 spurred the development of the New England textile industry and the founding of factory mutual companies. These early insurance companies inspected properties for hazards and suggested loss control and prevention methods in order to secure low rates for their policyholders.

In 1864, The Pennsylvania Mine Safety Act (PMSA) was passed into law.

In 1864, North America's first accident insurance policy was issued.

In 1867, the state of Massachusetts instituted the first government-sponsored factory inspection program.

In 1877, the state of Massachusetts passed a law requiring guarding for dangerous machinery, and took authority for enforcement of factory inspection programs.

In 1878, the first recorded call by a labor organization for federal occupational safety and health law is heard.

In 1896, an association to prevent fires and write codes and standards, the National Fire Protection Association (NFPA), was founded.

In 1902, the state of Maryland passed the first workers' compensation law.

In 1904, the first attempt by a state government to force employers to compensate their employees for on-the-job injuries was overturned when the Supreme Court declared Maryland's workers' compensation law to be unconstitutional.

On March 21, 1911, in the Asch Building in New York City, nearly 150 women and young girls died in the Triangle Shirtwaist Factory Fire because of locked fire exits and inadequate fire extinguishing systems. A major turning point in history, this fire changed regulation by the government and laws instituted to protect workers.

In 1911, a professional, technical organization responsible for developing safety codes for boilers and elevators, the American Society of Mechanical Engineers (ASME) was founded. A17 Safety Code was published.

1911-1915, During this five-year period, 30 states passed workers' compensation laws.

In October 14, 1911, the American Society of Safety Engineers (ASSE) was founded in New York City. Originally named the United Society of Casualty Inspectors. The ASSE was dedicated to the development of accident prevention techniques, and to the advancement of safety engineering as a profession.

California Railroad Commission, now known as the California Public Utilities Commission, ws created by constitutional amendment to oversee rail safety, including the safety of highway/rail crossings.

In 1912, a group of engineers representing insurance companies, industry, and government met in Milwaukee to exchange data on accident prevention. The organization formed at this meeting was to become the National Safety Council (NSC). (Today, the NSC carries on major safety campaigns for the general public, as well as assists industry in the development of safety promotion programs.)

In 1916, the Supreme Court upheld the constitutionality of state workers' compensation laws.

In 1918, the American Standards Association was founded. Responsible for the development of many voluntary safety standards, some of which are referenced into laws, today, it is now called the American National Standards Institute [ANSI].

In 1931 the Uniform Traffic Code was established because of the increase in speed and volume of motor vehicle traffic and accidents. The code consists of four separate acts: motor vehicle registration, driver licensing, automobile anti-theft and uniform traffic regulations.

In 1936, Frances Perkins, Secretary of Labor, called for a federal occupational safety and health law. This action came a full 58 years after organized labor's first recorded request for a law of this nature.

In 1936, the Walsh-Healey (Public Contracts) Act passed. This law required that all federal contracts be fulfilled in a healthful and safe working environment.

By 1948, all states (48 at the time) now had workers' compensation laws.

In 1952, Coal Mine Safety Act (CMSA) was passed into law.

In 1960, specific safety standards were promulgated for the Walsh-Healey Act.

On Jan 3, 1961, an accident at an experimental nuclear reactor at a federal installation near Idaho Falls, ID kills three workers. These were the first deaths in U.S. nuclear reactor operations.

In 1966, the Metal and Nonmetallic Mines Safety Act (MNMSA) was passed.

In 1966, the U.S. Department of Transportation (DOT) and its sections, the National Highway Traffic Safety Administration (NHTSA) and the National Transportation Safety Board (NTSB), were established.

In 1968, President Lyndon Johnson called for a federal occupational safety and health law.

In 1969, the Construction Safety Act (CSA) was passed.

In 1969, the Board of Certified Safety Professionals (BCSP) was established. This organization certifies practitioners in the safety profession.

In 1970, President Richard Nixon signed into law the Occupational Safety and Health Act (OSHA), thus creating the OSHA administration and the National Institute for Occupational Safety and Health (NIOSH).

In 1970, on January 1, the National Environmental Policy Act, (NEPA) was signed. This provided a national charter for protecting and improving the environment and created the Environmental Protection Agency (EPA).

On May 29, 1971, the firast OSHA standards were adopted to provide a baseline for safety and health protection in American workplaces.

In 1972, the Consumers Product Safety Act (CPSA) was signed into law.

In 1976, The Resource Conservation and Recovery Act (RCRA) passed and became the instrument by which the management of hazardous waste is regulated.

In 1980, to address the issues of hazardous waste management, the Pollution Liability Insurance Association (PLIA) was formed.

Jan 16, 1981 OSHA updates business electrical standards to simplify compliance and adopt a performance approach.

1991 North Carolina Plant Fire kills 25 workers and 49 injured at the Imperial Chicken processing plant in Hamlet NC. The employees were trapped inside due to padlocked doors meant to keep vandals away.

Sep 11, 2001, 2886 work related fatalities including 537 rescue workers, resulted from terrorist attacks on the NY City World Trade Center, at the Pentagon, an on the planes that crashed.


A History of Safety

Discount Goodyear Mtr Kevlar Schwinn Recumbent Bike Discounted

Friday, October 14, 2011

Gun Safe Reviews and Tips On Getting the Best Gun Safe Cabinet

!9# Gun Safe Reviews and Tips On Getting the Best Gun Safe Cabinet

[if ]
[endif]

Buying Tips For Finding a Quality Gun Safe Cabinet

When you buy a long gun safe, you want to be sure you're not getting taken for a ride. Here are some qualities of high-quality safes that you should watch out for.

First off, you should expect to shell out about 00 on up for a decent safe. Contrary to popular belief, the major makers know the best placement for hinges is on the outside (unless you're buying a Grade 1 European safe - they place the hinges on the inside, and have solid construction, no complaints here). The reason American safe makers place the hinges on the outside is so that the thieves waste precious time attacking that area, as opposed to the lock itself. They'll get nowhere on a quality long gun safe.

The interior should be, at the very least, 58-inches high. The reason for this is you'll have clearance then for your 30-inch-long barrels, and will allow for shelving near the top for your smaller items. Other great features to watch for, though they may be installed after-market, are a rotational rack, and a stack of drawers for your smaller guns and other items. After all, if you're going to shell out this much money, you may as well be organized to boot.

As to locking mechanism, the dials made by Sargent & Greenleaf®, whose parent company is Stanley Security Solutions®, are top-shelf according to many in the industry. They aren't the only name in the industry, but if they were, your guns would be in good hands! If you want to go with a digital combination, make sure it's a UL Listed Type II or better, or Type I (commercial grade electrical) lock. Anything less is risky business.

Do your homework as to fire-proofing material, and there are plenty of opinions on this subject. Many manufacturers are using the UL listing for fireboard (a.k.a. a thin layer of drywall) to list their safes as a fireproof gun safe. This isn't exactly top of the line quality, so really inquire from your manufacturer of choice how they construct their fireproof gun safe doors, walls and floor. A thin layer of drywall sandwiched between two thin sheets of sheet metal isn't a quality safe!

The weight of your fireproof gun safe - especially the fireproof gun safe! - should be at least 750lbs. The steel should be at the very least 8 gauge steel for burglary protection, the better models use fire cladding and solid steel plating. By the way, when buying a gun safe cabinet, the lower the gauge of steel, the thicker the material.

Security on your gun safe cabinet should be at least a UL-listed "RSC" (residential security container) rating - this is bottom shelf security and is not tested to withstand break-ins nor fire damage. This is the minimum rating, and should be able to buy you FIVE minutes under a theft attempt. Given minimal tools, in other words, a thief off the street will be able to crack open an RSC-rated safe.

Your better bet is to buy a European Grade 1, or UL Listed TL-15 or TL-30. There are other, higher ratings for safes that pass tests that UL conducts that include explosion endurance, impact resistance, 6-sided attacks, and torch attacks, but usually such ratings incur exorbitant fees and aren't typical for residential use. For that reason they won't be covered in our gun safe reviews, but know that if your gun safe cabinet has these ratings, you've bought a quality safe. One of the best fireproofing materials for fireproof gun safe construction is Palusol®. This material expands with heat and keeps out fire, smoke and usually water as well.

Be sure the exterior is rust-resistant as well - this safe should give you more than a lifetime of endurance. Also, gun racks, drawers, felt lined shelves, an interior lighting system, a bolt-pattern to secure it in place, and a dehumidifying system should all be included or at least installed at some point.

Gun Safe Reviews of Great Gun Safe Cabinets

Onto the gun safe reviews!

Ft. Knox "Legend" Series Gun Safe Cabinet

Ft. Knox "Legend" series is their top-level line of safes. They are made with a 3/16-inch steel body plate, and are also protected by a 10-gauge, reinforced steel lining. The doors on the Legend series are 1-3/4-inches thick, reinforced and fire-rated. Mind you, the 1-3/4-inches is an "overall thickness," so it isn't fully steel! Actually, the steel is only 5/16-inch at the door, so just a little over a quarter inch. In other words, a good measure of that thickness is drywall or "fireboard" as they call it - simply the same stuff you can punch a hole through with your hand in your home or office. The good news is that there is a qualified "hard plate" and ball bearings to foil drilling attempts.

Ft. Knox has their own locking mechanism - the "Rack and Pinion," which is a multi-gear system. They do have a mechanical re-locking system, but reviews seem consistent that their construction is decent. Their locking bolts are 100% independent of one another, and are comprised of up to 55 gears which in turn operate up to (28) 1-1/2-inch bolts. That's good security, as are the corner bolts in the door.

Other features are the UL Listing, and certified fire protection at 1680 degrees F, for 90 minutes. It should be noted that their fire proof method is simply 2 layers of drywall, so not necessarily the best way to go as far as options are concerned. A few nice touches are the lights package, carpet lining, "limited lifetime" warranty, dehumidifier, remote relocker, and optional biometric locking mechanism. A good start to our gun safe reviews, all told.

On a Budget? Try this on Offer From Granite Security®

Weighing in at under 600 pounds, and sporting an economic 9.99 price tag, Granite Security® (who makes Winchester® safes), makes a Sam's Club product that is available when it's available. This safe is better than the other bargain gun safe cabinet fodder on the market, though it doesn't have a ton of bells and whistles. Many would-be gun safes on the market are little more than sheet metal lockers, and set you back about -400.

Not this safe. This safe has a place on our gun safe reviews because it is a quality product for the price. It comes with 1-inch-thick bolts, 1-inch-thick door jamb, and the walls weigh in at 12-gauge steel. With that level of protection, it's been given the bare essential UL RSC rating, which is the lowest you want for a gun locker. It isn't as high as it should be - only 56-inches on the interior, which means you'll need to either modify the top shelf to accommodate your 30-inch-long barrel rifles, or remove the top shelf. The exterior is 60 x 30 x 22 inches.

A nice touch is that the interior is adjustable, so you can store 24 guns inside if you use both sides, or 12 on the left side. You can also opt for shelves throughout, but just plan on around 8 or 10 guns on each side. There is an access port for the dehumidifier, and this brute is heavy enough that a thief would have a difficult time walking away with it. The lock's UL approved, as well, so you'd be good to go with this one.

Stack On® 36-Gun, Fire Resistant, Waterproof, and Convertible Gun Safe Cabinet with Electronic Lock - GSXW-836-DS

Stack On® has been around since the early 1970's, producing quality gun safe cabinets, too chests, file cabinets and a host of other storage products. They have become a well-trusted name in making quality steel products, and this is the top-line, largest gun locker. This particular model is part of their "Total Defense Safes" line of products, so-called because they are rated from the ETL labs as fire-resistant as well as water resistant (according to their spec's, these safes can last in up to 2 feet of standing water for 72 hours!). The unit has a rubber-like gasket along the door, as well as other water-proofing measures.

If you want to keep your guns secure, this safe comes packed with 7 very large live-action bolts, as well as 3 dead bolts on the hinge-side of the door. The door is pry-resistant, making sure nobody gains access to the contents. The locking mechanism is a 3 number combination for simplicity, opened by an austere, 3-spoke handle covered with rubber grips. If you forget the combination and are timed out after 3 incorrect entry attempts, there is also a trouble-key included. And don't worry about replacing batteries, there's an alarm for low battery life, the batteries are simple to replace from the front of the safe.

Stack On safe's gun barrel rests are a patented feature, allowing your scoped guns to be neatly filed in place, using the carpeted gun racks. The gun safe cabinet comes with 6 fully adjustable shelves, so you can store 36 rifles or split the difference and use the safe for storage of other valuables in half of the space. The powder coated, silver and black motif with chrome hardware makes for a pretty sight, as well. At little over 00, this is a rugged piece of equipment that will give you years of enjoyment.

That's the last of the gun safe reviews, you can't go wrong with these brand names at your disposal. Just remember to check the warranties, the independent lab certifications, and you're on your way to owning the gun safe cabinet of your dreams.


Gun Safe Reviews and Tips On Getting the Best Gun Safe Cabinet

Low Price Fitness Horizon Treadmill

Sunday, October 2, 2011

Eva-Dry Edv-2200 Mid-Size Dehumidifier

!9# Eva-Dry Edv-2200 Mid-Size Dehumidifier

Brand : Eva-dry | Rate : | Price : Too low to display
Post Date : Oct 02, 2011 20:46:41 | Usually ships in 24 hours


  • Peltier Technology
  • Small enough to be placed out of sight
  • Auto shut off when to capacity
  • Low energy consumption

More Specification..!!

Eva-Dry Edv-2200 Mid-Size Dehumidifier

!9# KOI Guru Center Low Cost Hamilton Beach Microwaves




Sponsor Links